Organizer in the shape of a picture
A holder for pencils, make-up or toothbrushes in the shape of your picture. The outline makes the wall; inside are compartments in a grid, or round holes.
Material and quantity
A finished print, as an examplelib:nature/cloud
The calculation shows the exact price and print time, and you can download the model or a project for your printer. No sign-up.
It prints bottom down, without supports. For a bathroom choose PETG; PLA softens in damp and heat over time. A holder with holes is a solid block: it takes longer to print but does not tip over.
Holder and organizer in the shape of your own picture
The tool makes a holder whose wall follows the outline of a picture: a cloud, a heart, an animal, or anything you upload as a PNG, JPG, WebP or SVG or pick from the library. The width goes from 60 to 200 mm and the height from 40 to 120 mm; the wall is 1.6 mm thick and the floor 2 mm, and both can be changed. Instead of the outline of the picture you can choose a circle.
The inside comes in three forms. Compartments in a grid, 20 to 80 mm in size, suit pencils, crayons and make-up. Round holes of 8 to 40 mm in a solid block hold toothbrushes, markers or brushes one by one. The third is a single open pocket. The holder is a one-colour print without supports; order the finished design in a colour that is loaded in the printers right now, or download the model for free.
How it works
- Choose a picture or a silhouette. Upload your own picture or pick a motif from the library. The background is removed by itself and the outline is smoothed.
- Choose the inside. Compartments in a grid, round holes, or one pocket. The size of a compartment and the diameter of a hole are set with a slider.
- Set the dimensions. Change the width and the height with the sliders or by dragging the arrows in the preview. Below the preview you read how many compartments or holes came out and how deep they are.
- Order a print or download. Next to the preview you see the dimensions; the calculation after "Continue" shows the precise price and print time. The model and the slicer project are free to download without an account.
What the tool can make
Common questions
What picture suits a holder?
A shape with a clear outline and no thin spikes: a cloud, a heart, an apple, the head of an animal. A compartment does not fit into a narrow tip, and a thin wall is more fragile there.
How big should the compartments be?
For pencils and crayons 30 to 40 mm, for scissors and rulers 50 mm and more. The grid is divided evenly, so the real size differs from the one you enter by a few millimetres; the number of compartments is shown below the preview.
What hole diameter fits a toothbrush?
Measure the handle at its widest and add 2 mm; for a common toothbrush that is about 18 to 20 mm, for an electric one about 30 mm. At least 1.6 mm of wall stays between the holes.
What should the holder be printed from?
PLA is enough for a desk. For a bathroom choose PETG, which takes damp and warm water. A holder with holes is a solid block; it prints longer and weighs more, but it does not tip over.
Can the bottom be cleaned?
Yes, the holder is one piece without joints and can be rinsed. PLA does not belong in a dishwasher; it softens at about 55 °C.
How do I pay and how do I get the holder?
You pay from prepaid credit that you top up by card; prices are shown in Czech crowns or in euros. We send the print through Packeta to a pick-up point or to an address in the EU.
Looking for something else? See all Tools