matplace
Tools

Bust or figure from a photo

A bust or a whole figurine of a person, a toy or an object as a 3D print. One photo from the front is enough, with photos from other sides the likeness is closer. The shape is an artistic impression, not an exact copy.

Photo

Bust / Figure
How to take the photo so the model comes out well
  1. Step back 1.5 to 2 metres. A close-up distorts the face.
  2. Frame the person from the top of the head to the waist, with free space around both shoulders.
  3. Hold the phone at the height of the face, not from above or below.
  4. Keep the arms loose along the body, not on the hips or crossed.
  5. Shoot in front of a plain wall, with nothing in the background, in even light.
  6. Take the side and back photos from the same distance and height.

Thin spectacle frames and single strands of hair print badly. Hair tied back or combed close to the head comes out better.

JPG, PNG or WebP up to 12 MB. A big photo from a phone is made smaller before it is sent.

Photos from more sides

More photos give a better result. Add a photo from the side and from the back, the model then matches the likeness and the hair better. It is optional.

Same distance and light as the front photo, turn 90° each time (left, back, right). Even one extra side helps. A photo we cannot use is left out and the model is made from the others.

Base

Finish and base
  • Bust on a block: The arms are cut away by two flat faces just outside the shoulders, the chest ends flat and stands on a low square block with rounded corners. The name can stand on its front.
  • Bust on a disc: The same cut of the chest, a little narrower, on a low round disc with a rounded edge. The name can run round its rim.
  • Bust on a stem: The chest without arms is rounded underneath and narrows to a short stem on a round foot. The name can run round the foot.
  • Modern bust: The chest with its arms is cut in an arc underneath and lies on a turned foot with the name round its band.
  • Antique bust: A deeply rounded chest stands on a tablet with the name and a socle with a wide foot.
  • Sculptor's cut: No base, the bust stands on its own flat cut with the shoulders cut at a slant.

The name is raised on the front as part of the model, in capitals. Keep the text short, letters under 3 mm do not print legibly.

We delete the side photos, and the picture made of the photo before the model is built (the person without the background), as soon as the model is created. We delete the front photo within 24 hours of the model being made; if you order a print of the model, a copy stays with the order for 14 days for the video of your print and is then deleted. Only people with the link see the model; for guests it is deleted after 30 days.

Free: 3 models a day without an account, 8 with one. The model takes 2 to 4 minutes.

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

A 3D model of a bust or figure from your photo

The tool turns a photo into a 3D model: a bust with head and shoulders, or a figure of a whole body or an object. It suits a portrait, a pet or a favourite toy. One photo from the front is enough. Photos from the left, the back and the right make the likeness and the hair closer. The shape is an artistic impression, not an exact copy.

The model takes about a minute and opens in the calculator, where you see the print price and can change the size and the base. You order the print from us or download the model for your own printer for free. One model a day is free without an account, three with an account. We delete the photo as soon as the model is created.

Before you order

How much is a printed bust and how big is it?

A bust 120 mm high comes to 130 CZK with us and 150 mm to 200 CZK (PLA+, one piece, without delivery; calculations on the live site, 17 Oct 2026). Change the size in the calculation and the price follows.

How long do printing and delivery take?

The model takes 2 to 4 minutes. An 80 mm bust prints in about an hour, a 150 mm one in just under three hours. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic.

What is the bust printed from, and in what colour?

In one colour of PLA or PLA+. Matte shades suit figures best: they show the print layers less.

What if I do not like the model?

You look at the model in 3D first. Within the daily limit (3 without an account, 8 with one) you can try another photo; the base, the name and the dedication change without a new generation.

Can I download the model and print it myself?

Yes, as an STL or a project for your printer. The busts we printed needed no supports; the check in the calculation confirms it for your model.

How do I get the print?

We send it with Packeta to a pickup point or an address in the EU (in the Czech Republic from €4.00). Once we hand the parcel over you get an e-mail with a tracking link.

Who it is for

A gift with a personal dedication

A 120 mm bust with a name and a dedication on its base, for a birthday, an anniversary or as a thank-you. It fits a shelf or a desk.

A colleague, a coach, a teacher

For a farewell or the end of a season: one photo from the front is enough, and the team’s signature fits the base.

For yourself

Your own 80 mm figure for the desk, or a blank to paint with acrylics.

How it came out

Real prints from our farm that customers had made with this tool.

  • A print from the tool Bust or figure from a photo, PLA Silk, 17 Nov 2026

    PLA Silk · 17 Nov 2026

  • A print from the tool Bust or figure from a photo, PLA Silk, 17 Nov 2026

    PLA Silk · 17 Nov 2026

  • A print from the tool Bust or figure from a photo, PLA metallic SUNLU, 16 Nov 2026

    PLA metallic SUNLU · 16 Nov 2026

  • A print from the tool Bust or figure from a photo, PLA metallic SUNLU, 16 Nov 2026

    PLA metallic SUNLU · 16 Nov 2026

How it works

  1. Choose bust or figure. A bust shows the head and shoulders, a figure the whole body or an object.
  2. Upload the photos. Choose or take a photo from the front: one person or object, plain background, sharp picture. Photos from the left, the back and the right are optional, but they improve the likeness.
  3. Set height and base. The print height can be set from 30 to 250 mm. You pick the style of the base and can have a name written on it.
  4. Create the model. Tick the consent to the processing of the photo and click "Create model". It takes about a minute; please stay on the page.
  5. Order the print or download. The finished model opens in the calculator. There you get the price, order the print or download the model.

Common questions

How should I take the photo for a good bust?

Step back 1.5 to 2 metres, hold the phone at the height of the face and frame the person from the top of the head to the waist. Shoot in front of a plain wall in even light, with the arms loose along the body.

Will the model be an exact copy of the person?

No, the shape is an artistic impression. Thin spectacle frames and single strands of hair print badly; hair tied back or combed close to the head comes out better.

How many models can I create for free?

One a day without an account and three a day with an account. With an account, a further generation beyond the limit can be paid from credit. The whole site also has a shared daily cap; once it is used up you have to wait until the next day.

What happens to my photo?

Our model-generation provider processes the photo and we delete it as soon as the model is created. Only people with the link see the model, and for visitors without an account it is deleted after 30 days.

Can I upload a photo of someone else?

Only with their consent. Before the model is created you confirm that the photo shows you or that you have the consent of the person in it. A photo we cannot use is refused.

Will the print be in colour?

No. The model carries only the shape and is printed in one colour. You choose it when ordering, from the colours loaded in the printers at that moment.

Where next

Looking for something else? See all Tools