Charm from a picture or a name
Upload a picture, pick one from the library, or type a name. You get a charm in the colours of our filaments, with an eyelet you can move wherever you like.
Material and quantity
A finished print, as an examplelib:colour/happy-ghost
The calculation shows the exact price and print time, and you can download the model or a project for your printer. No sign-up.
It prints flat, face up, without supports. The colours lie one on another, so a printer with a single nozzle can print it too: just swap the filament at the heights the project contains.
A charm from your own picture or name
The tool turns a picture or a name into a charm for keys, a bag, a backpack, a zip pull or a gift tag. Upload a PNG, JPG, WebP or SVG, pick a motif from the library, or type a name in one of thirty typefaces. The background disappears automatically and the picture is reduced to 1 to 8 colours of filaments we really have in stock on our print farm. The charm follows the outline of the picture, or is a circle or a rectangle, 20 to 120 mm wide and 2 to 6 mm thick.
The eyelet moves anywhere along the outline by a slider or by dragging it in the preview, with a hole of 2 to 6 mm and a wall of 1.5 to 3 mm. The colours lie one on another, each 0.6 mm higher unless you change it. Any printer can print such a charm by swapping filament at the given heights. Our farm prints up to four colours in one print: the base and up to three more. You confirm the spool for each colour when ordering; a design with more colours can be downloaded free for your own printer.
How it works
- Upload a picture or type a name. Upload a picture, pick one from the library, or reuse one you uploaded earlier. Instead of a picture you can type a name or a short text on one or two lines.
- Tune the outline and colours. A slider from 0 to 100 sets how much of the background goes; edges can be smoothed by up to 1 mm. Choose the number of colours, give each a filament in the colour window and, if you like, join two colours into one.
- Set the size and the eyelet. Enter the width, the thickness and a frame of up to 3 mm round the picture, with a bevelled edge if you want one. Grab the eyelet in the preview and drag it to the point the charm should hang from.
- Order the print or download. Next to the preview you see the size; the calculation after "Continue" shows the exact price and print time. You can also download the model as an STL, a ZIP with one STL per colour or a slicer project, free and without registration.
What the tool can make
Common questions
Can I use just a name instead of a picture?
Yes. Type one or two lines and pick one of thirty typefaces, from bold sans serifs to handwriting. The tool ties loose pieces together with a small bridge so that the charm holds together, and tells you so.
Where can the eyelet go?
Anywhere on the outline: by a slider, or by dragging it in the 3D preview. The hole is 2 to 6 mm, 3 mm by default, and the ring wall 1.5 to 3 mm.
How are the colours printed?
The colours lie one on another, each 0.4 to 1.2 mm higher. Every layer is therefore a single filament, which you swap at the right height; the project for OrcaSlicer, Bambu Studio and PrusaSlicer contains the swaps. Colours flush with the surface and a rim in its own colour need a printer that changes filament by itself (AMS, MMU, ACE).
How many colours does the farm print?
Up to four in one print: the base and up to three colours on top of it. You confirm the spool for each colour when ordering; the ones from the design are preselected. A design with more colours can be downloaded free for your own printer.
What is the charm printed from?
We recommend PLA. It prints flat, face up and without supports. For a charm that will get warm, for example in a car in the sun, PETG is the better choice.
How do I pay and how do I get the charm?
You pay from prepaid credit that you top up by card; prices are shown in Czech crowns or euros. We send the print by Packeta to a pickup point or to your door across the EU.
Looking for something else? See all Tools