matplace
Prometheus

Prometheus

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

Photo shows it on the side of my X1C. A two-parted filament painting, be sure to print both parts with following swaps, they will then fit perfectly: *** BE SURE TO SET SWAPS ON PLATE 2 MANUALLY *** *** EXPERIMENT WITH THE COLORS *** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #13 (1.12mm) swap to Dark Blue At layer #16 (1.36mm) swap to Orange At layer #27 (2.24mm) swap to Ivory White for the rest.

Similar models