matplace
Balloon Dog (Jeff Koons) [nose optimized]

Balloon Dog (Jeff Koons) [nose optimized]

by Kleiner Lateiner · Printables

Do you have the file? Print it on our printer

The licence of the model (CC BY (attribution)) allows commercial use too. Download the file at the source and upload it to us. We note the author and the source on the order for you.

Upload the file and print
Licence
CC BY (attribution)
Largest side
about 110 mm
Printing estimate
about 45 g of filament, 4 h 0 min
Price with us
from €8.20 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Model of Jeff Koonss Ballon Dog.I recommend for FDM printing to print the model splitted in left and right half. So that there are no or only a few supports needed.The two halfs can now be connected with the feather keys. The keys have a gap of 0.2mm which seems to work fine for most printer. Remember that the gap changes size when you scale the model. You should test the tolerances of your machine before printing to ensure the print works fine. If it doesn't work just rescale and reprint the feather keys.modeled in Fusion 360and in Blender 3D (Ballondog_Blender)I think this model would be very pretty in Polyalchemy Elixir.If someone prints this in Polyalchemy Id be very happy if you could contact me and send me a picture of the print.Category: Sculptures

Similar models