matplace
Phone holder/bracket for monitor

Phone holder/bracket for monitor

by DJ · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 85 mm
Printing estimate
about 18 g of filament, 1 h 35 min
Price with us
from €4.00 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

GOAL: Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info. Versions • Standard bracket • Bracket with one cable guide • Bracket with two cable guides The cable guides can be used to guide the charging cable of the screen. It looks the best using a dark cable with a dark phone and dark brackets. NOTE: don't forget to print TWO brackets! :-) Print setup • PLA • 0.2mm • 25% infill • Bottom/Top solid layers: 4 • Perimeters: 4 • No supports needed Measurements (per 'standard' bracket) Size: 12.5 cm x 8.4 cm x 3 cm Weight: approx 15 grams Mounting To stick these brackets to the back of the monitor I used thick transparent 'Nano tape' (doublesided tape). Just search and you will find it. It is removable without leaving residu and can even be re-used. (it really can!) Background info • Phone: Older Redmi Note 9 • at 35% brightness the power consumption is +/- 1 Watt! • Application: Home Assistant • Future: push doorbell camera when the doorbell rings • Future: display showing (Prusa) 3d print progress • Future: push 3dprinter camera when 3d print is ready

Similar models