Phone holder/bracket for monitor

O modelu

GOAL:  Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info. Versions • Standard bracket • Bracket with one cable guide • Bracket with two cable guides The cable guides can be used to guide the charging cable of the screen.  It looks the best using a dark cable with a dark phone and dark brackets.  NOTE: don't forget to print TWO brackets! :-) Print setup • PLA  • 0.2mm • 25% infill • Bottom/Top solid layers: 4 • Perimeters: 4 • No supports needed Measurements (per 'standard' bracket) Size: 12.5 cm x 8.4 cm x 3 cm  Weight: approx 15 grams Mounting To stick these brackets to the back of the monitor I used thick transparent 'Nano tape' (doublesided tape). Just search and you will find it. It is removable without leaving residu and can even be re-used. (it really can!) Background info • Phone: Older Redmi Note 9 • at 35% brightness the power consumption is +/- 1 Watt! • Application: Home Assistant • Future: push doorbell camera when the doorbell rings • Future: display showing (Prusa) 3d print progress • Future: push 3dprinter camera when 3d print is ready