matplace
Mecha phone/tablet stand

Mecha phone/tablet stand

by Fishbone Workshop · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 140 mm
Printing estimate
about 85 g of filament, 4 h 0 min
Price with us
from €10.10 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

I think that phone stand competition is my dream come true. It's because that gives me a chance to finally create a project, that idea of which I have had in my mind for about a year. The idea was to make a stand that looks like futuristic robot/mecha. I made a project for FDM printing, but using SLA is also posible. I printed my model with yellow and silver PLA and tested it with my phone and 12,4' tablet. In both cases, stand is stable and angle is perfect for video meetings. Part list: • Body_Top.stl - 1x • Body_Top2.stl - 1x • Pin.stl - 4x • Body_Join - 1x • Body_Bottom - 1x • Leg1.stl - 4x • Leg2.stl - 4x • Leg3.stl - 4x • Foot.stl - 4x Estaminated printing time: ~12,5h (0.2 layer, 20% infill) Assembling is straightforward, each part fits in their own socket. For gluing use glue of your choice (I used regular CA glue). Depends on your printer calibration, there is a chance that you will need some polishing during test-fitting. Happy printing!

Similar models

Stand

MakerWorld · Flash Gordon