matplace
Mecha phone/tablet stand

Mecha phone/tablet stand

autor Fishbone Workshop · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 140 mm
Odhad tisku
asi 85 g filamentu, 4 h 0 min
Cena u nás
od 252 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

I think that phone stand competition is my dream come true. It's because that gives me a chance to finally create a project, that idea of which I have had in my mind for about a year. The idea was to make a stand that looks like futuristic robot/mecha. I made a project for FDM printing, but using SLA is also posible. I printed my model with yellow and silver PLA and tested it with my phone and 12,4' tablet. In both cases, stand is stable and angle is perfect for video meetings. Part list: • Body_Top.stl - 1x • Body_Top2.stl - 1x • Pin.stl - 4x • Body_Join - 1x • Body_Bottom - 1x • Leg1.stl - 4x • Leg2.stl - 4x • Leg3.stl - 4x • Foot.stl - 4x Estaminated printing time: ~12,5h (0.2 layer, 20% infill) Assembling is straightforward, each part fits in their own socket. For gluing use glue of your choice (I used regular CA glue). Depends on your printer calibration, there is a chance that you will need some polishing during test-fitting. Happy printing!

Podobné modely

Stand

MakerWorld · Flash Gordon