matplace
Batman Logo- Adam West Era - HueForge

Batman Logo- Adam West Era - HueForge

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

I took the adam west batman logo and put it into hueforge and made a print from it Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Sapphire Blue At layer #12 (1.04mm) swap to White At layer #21 (1.76mm) swap to Savannah Yellow for the rest.