Neznámý zdroj
Batman Logo- Adam West Era - HueForge
⚠️
Pozor na autorská práva. Modely značek tiskneme jen pro osobní účely. Pro firemní dárky zvolte vlastní design.
🏭 100+ tiskáren
·
po celé ČR
·
⏱ nabídky do 24 h
Popis
I took the adam west batman logo and put it into hueforge and made a print from it
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Sapphire Blue
At layer #12 (1.04mm) swap to White
At layer #21 (1.76mm) swap to Savannah Yellow for the rest.
