Cookie cutter
Type a text or upload a picture of the shape (a pencil outline will do). You get a cutter: a thin wall standing on the plate with a flange to press on. Lines inside the shape become a stamp.
- 1Settings
- 2Preview and price
- 3Print or download
An estimate from the model volume. The next step computes the precise price and print time.
Next you will see the precise price and print time. Order the print from us, or download the file for your own printer.
The design is saved, you pick your printer and download a ready project with print settings.
Prints flange down, no supports. The outline is mirrored: turned flange up it cuts the right way round. Use PLA or PETG and wash by hand in lukewarm water, never in a dishwasher.
A cookie cutter from a name, a number or your own drawing
The tool makes a cookie cutter from a text or a picture. Type a name, letter or number, or upload a drawing of the shape; a pencil outline will do. You get a thin wall along the outline with a flange to press on. The shape can be 30 to 150 mm wide and the wall 10 to 30 mm high, with a tapered or straight cutting edge.
When the uploaded picture has lines inside the outline, such as leaf veins or eyes and a smile, the tool turns them into a separate stamp to press into the dough after cutting. The outline is mirrored, so with the flange turned up it cuts the right way round. Order the cutter as a print from our print farm, or download the model free for your own printer.
How it works
- Type text or upload shape. The text can have two lines of 20 characters each, in one of four typefaces. Instead of a text you can upload an SVG or a picture of the shape.
- Set the sizes and edge. Enter the shape width, the wall height and thickness and the flange width. A tapered edge cuts more cleanly, a straight one is sturdier.
- Check the preview. The preview shows the cutter turned the way it is used, with the stamp beside it if there is one. The closed inside of a letter, as in an O, gets its own wall, tied to the rest by flat bars.
- Order the print or download. Order the print from our print farm and pay from prepaid credit. Or download the model free as an STL file or a ready project for your own printer.
What the tool can make
Common questions
What kind of picture makes a cutter?
A simple dark drawing on a light background, or an SVG with filled shapes. Everything the drawing encloses counts as the shape, and the largest connected area is used. Photographs are not suitable.
When do I also get a stamp?
Only with an uploaded PNG, JPG or WebP picture that has enough lines inside the outline, and only while the option "Stamp from the inner drawing" stays ticked. A text or an SVG gives no stamp.
What is the cutter printed from and how is it washed?
We recommend the ordinary plastic PLA or the stronger PETG. Wash it by hand in lukewarm water and never in a dishwasher: PLA starts to soften at about 55 °C.
Is the print suitable for contact with food?
The cutter is meant for brief contact with raw dough that is baked afterwards. We do not recommend printed parts without a liner for lasting contact with food.
How fine can the shape be?
The tool leaves out any part of the shape that is narrower than twice the wall thickness, because dough would get stuck there. So make small lettering bigger or choose a shorter text.
How do I pay and how do I get the print?
You pay from prepaid credit that you top up by card; prices are shown in Czech crowns or euros. We send the print by Packeta to a pickup point or to your door across the EU.
Looking for something else? See all Tools