matplace
ToolsModel check before printing

Check an STL file before printing

Upload a model and we tell you what we can check reliably and what it means for printing.

File

Result

Sizes and parts appear with the preview.

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

What the check looks at, what it does not judge, and how to read the report

The check is for the moment when you have an STL, 3MF, OBJ or STEP and do not know whether a printer will take it. You upload the file and within a few seconds you get a report in three groups: errors, advice and what is fine, each finding with what it will do to the print and how to put it right. It watches the units (a model under 1 mm was almost certainly saved in metres or inches, one over 2 m the other way round), the thinnest dimension under 0.8 mm, which a 0.4 mm nozzle cannot print, whether the mesh is closed, flipped faces, the number of separate bodies, a mesh over 1.5 million triangles that slows the slicer down, and a mesh under 40 triangles that gives a faceted print. It also says whether the model fits a printer with a build space of 250 × 250 × 250 mm; for a set of parts it measures the largest one. It does not judge overhangs, wall strength or accuracy, because they depend on the printer, the material and the orientation of the model. It only reads the file and changes nothing in it.

An example from 27 October 2026: a bust of 60 × 52 × 78 mm into which we cut three holes and flipped part of the faces. The check returned three lines: size 60 × 52 × 78 mm fine, the error "the mesh is not closed" and the advice "51 separate bodies". With one button we sent it to the repair; afterwards the mesh is closed, there is one body and the check is clean. A healthy model goes straight on: the price button opens it in the calculator, where you see the grams, the print time and our price, or you download the project for your own printer. The check is free, needs no account and has no limit on files.

Before you order

Does the check look at wall thickness too?

Only the thinnest dimension of the whole model: under 0.8 mm is an error, because a 0.4 mm nozzle cannot print such a wall. A thin spot inside an otherwise thick model is not found by the check; the slicer shows that.

What happens to a model that does not pass?

Holes and flipped faces go to the repair with one button. A model bigger than the printer is scaled down in the calculator, or split into parts with pins. Wrong units are solved by saving the file again in millimetres.

If the check passes, can I order the print right away?

Yes. The price button opens the model in the calculator, where you see the grams, the print time and the price. The same check runs in the calculation, so nothing is reported twice.

Are STEP, 3MF and OBJ checked too?

Yes. A STEP from a CAD program is converted to a mesh and checked like an STL; in a 3MF the shape is checked, the colours and print settings are left aside.

How long do printing and delivery take?

The calculation shows the print time. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).

Do you keep my file?

The file serves the check, the repair and the calculation and is passed to nobody else. The check does not touch it; the model you download is the same file you uploaded.

Who it is for

Before printing at home

A downloaded model before slicing: in a few seconds you know whether it has the right units, a closed mesh and fits the bed.

A club, a school, a FabLab

Files from students made in Tinkercad and SketchUp: the report tells everyone what to fix, with no program to install.

Before ordering from us

Every model on our farm goes through the same check. Whoever runs it in advance knows the order will go through without questions.

How it works

  1. Upload the model. Choose an STL, 3MF, OBJ or STEP or drop it into the field. The largest file size is written right there.
  2. Read the report. Next to the rotatable preview are the findings in three groups: "Errors", "Advice" and "Fine", each with an explanation for the print.
  3. Repair, or continue to the price. Holes and flipped faces go to the repair with one button. A healthy model opens in the calculator, where you order it or download it.

Common questions

What exactly does the check look at?

Units (under 1 mm and over 2 m is an error, under 5 mm a warning), the thinnest dimension under 0.8 mm, holes in the mesh, flipped faces, several separate bodies, a mesh over 1.5 million or under 40 triangles, and whether the model fits 250 × 250 × 250 mm.

Does the check guarantee that the model will print well?

No. Overhangs, wall strength and accuracy depend on the printer, the material and the orientation of the model, and the check does not judge them. It says only what can be found reliably in the file.

The check found holes in the mesh or flipped faces. What now?

The button next to the finding sends the model to the repair. It closes the holes, turns the faces, and you download the repaired STL free; the repair report shows the numbers before and after.

Why does the check say my model measures only a fraction of a millimetre?

It was saved in metres or inches instead of millimetres. Save it again in millimetres, or scale it in the calculator by 1000 (metres) or 25.4 (inches).

The model does not fit the printer. What can I do?

The check says which dimension is over 250 mm. Either scale the model down in the calculator, or cut it with the Split model tool into parts with pins that fit.

The check reports several separate bodies. Is that a fault?

For a box with its lid or a set of parts it is by design, and the check knows that for our own tools. In a downloaded model they are usually fragments of a broken mesh or specks; the repair joins or removes them.

Where next

Looking for something else? See all Tools