Y-Splitter for BambuLab AMS

About the model

Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay very cheap. https://www.amazon.com/s?k=PC4-M6 https://www.ebay.com/sch/i.html?_nkw=PC4-M6 Dont forget your PC4-M6 connector clip, to make sure the PFTE tube stays in place: https://makerworld.com/en/models/19421 Update: I've seen a lot of PLA makes, I highly suggest printing these in a material harder than what you normally print with, or the filament will grind out the model. It will take 6 month of printing but when it happens you are gonna sigh and dislike printing a second one. So make it in a material harder than PLA(assuming thats what you usually use) That way the splitter will grind the fillament instead, since its such minute it wont affect your printing, but after 6 month instead of having to replace the splitter you just have to blow away some dust.