X1C P1P P1S base insert | Ramp for debris removal

About the model

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it's purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. Alternative Design: Interference fit so better for fine debris: https://makerworld.com/en/models/507985#profileId-423740 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Boost MeIf you appreciate this design and the development path it's taken then please consider rewarding me with a boost. Thanks. A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic. I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects. The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.