matplace
tavira • planter

tavira • planter

by h3li0 · Printables

This model cannot be printed on matplace

Its licence (CC BY-NC (non-commercial)) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
CC BY-NC (non-commercial)

About the model

tavira • planter modern planter blending minimalist design with intricate detailing, and a convenient screw-in drip plate dimensions in mm • 100 mm height ~ x • 133 y • 133 z • 100 • 80 mm height ~ x • 106 y • 106 z • 80 important • filament should be dry and calibrated so that it deals appropriately with printing the patterns • build plate must be properly clean so that there aren't adhesions issues and lifts during the print • ensure you do not over-tighten the planter and plate and risk breaking the thread, it is a short thread that only requires a small amount of pressure to lock in place photos show printed in pla metal and pla wood • .40mm nozzle • adaptive layer height • 15% adaptive cubic infill • no supports notes • commercial licence membership available on my patreon • all photos uploaded are of the actual printed model, and are copyright protected • if you enjoy this model please consider to buy me a coffee • includes 3mf files and STLs follow me on instagram to stay updated on new releases • h3li0.design

Similar models