Switch Game Carousel

About the model

*This project requires one 608 bearing* There is a printable spring that adds a slight clicking sound when the carousel is spun. This is recommended, but optional. As with any assembly that prints in multiple pieces and/or uses other components, actual clearances will be dependent on YOUR printer. Print Settings The Nintendo Switch logo in the middle of the carousel is designed to give you two options: • If you have an AMS, MMU or similar product, the logo can be easily painted in the slicer • If you do not paint it in the slicer, the logo will not appear at all Assembly Instructions • Insert a 608 bearing into the center of the base • If you are using a spring, use a very small amount of glue to secure it into the hole as shown below • Place the carousel on top of the base, ensuring that the gear tip drops into the center of the bearing The filaments used in the pictures above: • Bambu Lab Red Matte Scarlet Red PLA • Bambu Lab Matte Charcoal PLA • Bambu Lab Matte Ivory White PLA