Saw and thin tool holder with French cleat backer

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print

Origin: Open on MakerWorld ↗
Licence: personal use only

About the model

Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue. Cam lobe tires work great printed with TPU for friction, but a version with the cam lobe in full is also attached (may need some electrical tape or similar to provide enough friction for engaging the cam).