matplace
Phone Stand

Phone Stand

by DaHouzKat · Printables

This model cannot be printed on matplace

Its licence (CC BY-NC-ND (non-commercial, no derivatives)) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
CC BY-NC-ND (non-commercial, no derivatives)

About the model

Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand. I like to design things and i also like to challenge myself ! So one thing leads to another even if the design is complete madness ;-) Be advised, this model is not easy to print • Consider this model as a torture test for you printer, filament profile and your skills • Note that this model can be resized for easier printing, try 120% for example • You may also consider trying this simpler and easier to print resizable Phone Stand If you liked this model and want to help me by supporting my hobby • Dont’t forget to post your make on Printables and/or Social Media • You may also look into my store for my Improved Phone Stand Features • Stand is suitable for a 14mm thick phone • Notch for a 2.6mm phone charger cable • Inclination of the stand is adjustable • Slide Out to adjust / Slide In to lock • Integrated locking mechanism • Resizable at least to 120% • Print in place • No Support • No Brim Print Instructions • Print the model on it's side (already in the correct position) • Use Default 0.20mm QUALITY Prusa Slicer Print Settings • Filament : PLA or PETG • Recommended custom settings • Paint-on Seam : Highly Recommended • Avoid crossing perimeter • Infill : Gyroid 15~20% • Perimeters : 2~3 • Support : No • Brim : No

Similar models