matplace
Phone or tablet stand (adjustable)

Phone or tablet stand (adjustable)

by E. Soderberg · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 110 mm
Printing estimate
about 45 g of filament, 2 h 45 min
Price with us
from €6.70 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

A phone holder with adjustable inclination. It firmly holds set position without needing to engage any locking mechanism. Prints in place with no supports. The initial turn takes a little bit of extra force. Do not over torque the adjustment knob, or you risk breaking it off. Instead, insert an Allen wrench into any one of the 4 planet gears (see picture #5) and turn just a fraction until the mechanism breaks free. It should move easily and freely using the adjustment knob at that point. Load as single object having multiple parts in slicer. Test prints done in PLA, .2 layer height, 4 walls, 0 top and 0 bottom layers, 30% honeycomb infill, no supports or brim.A second model is also provided, better sized for tablets. See last photo for size comparison shot between models. Link to Solid Works Gear Generator app for your own designs with gears.

Similar models

Stand

MakerWorld · Flash Gordon