Penguin Articulated - smaller size remix
by JP3D · Printables
Print it for yourself
The licence (CC BY-NC-SA (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.
Upload the file and print- Origin
- Open on Printables ↗
- Licence
- CC BY-NC-SA (non-commercial)
- Largest side
- about 85 mm
- Printing estimate
- about 18 g of filament, 1 h 35 min
- Price with us
- from €4.00 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.
About the model
Penguin with moveable wings and feet. Beak can be pressed. Inspired by the dancing penguin emoji from Microsoft teams. See here for more information. • There is space for adding two 1ct coins, so the penguin can balance on one foot. • A spring with 5-6mm diameter and 2-3mm height is needed if you want to be able to press the beak. You can easily cut a spring with pliers, if it's longer than 3mm. Alternatively, you can print the beak_withoutSpring to get a fixed beak. • Warning: Tolerances are tight, so your printer needs to be tuned well. Work in progress. I'd love to hear your feedback on the model! Assembly instructions: Step1: Push the white bottom part into black bottom part. It needs to click in 3 spots to be aligned right. Make sure the black part is the right one! It needs to have a cutout for the coins. You will need some force, but the benefit is that it will hold together well. Step2: Place one coin, one foot and one arm as shown in the picture. Step3: Place the other coin, other foot and wing. Step4: Push the upper white part into the upper black part. Again, you will need some force. Step5: Put the beak and eyes where they belong. Step6: Put the spring in the cutout of the beak or glue the beak to the white part. Step7: To make assembly easier you can put tape on the front of the penguin to hold the eyes and the beak in place. Last Step: Push together the two halves of the penguin. It is a tight fit but that way it should close perfectly. Finished: If you want to, you can attach the hat now. In the future there may be a version where the hat attaches via magnets.
Similar models
Buzz Lightyear Multipart Fanart
matplace
Cat
MakerOnline · Yang3D(
Stitch NO AMS
matplace
Streetwear Bowser Figure | Super Mario Urban Fan Art
Printables · Fluid Prints
Tom Cat
matplace
Flexi Factory and Bambu Lab Collaborative: Panda Bear and Stand
MakerWorld · flexi.factory
