Pacing horse

About the model

I found this horse on myminifactory and tried to print it. Worked out pretty well. I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it. I used custom supports in Cura an also minimal boomsupport. https://www.myminifactory.com/object/3d-print-pacing-horse-103084 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.28 Infill: none Filament: Reprapper PLA White Notes: I found this horse on myminifactory and tried to print it. Worked out pretty well. I did not use infill so i had to fuse some parts afterwards. The top of the back seperated due to shrinking. I heated up the part and gently forced them together. Also the front leg which is of the ground broke from its supports. i had to use my hand 3D printerpen to fuse it. I used custom supports in Cura an also minimal boomsupport. EDIT: I made a new baseplate and removed the one on the horse. Now its easier to make some custom supports to hold the legs. Also i reduced the number of polygones to make the file a lot smaller but keep the details. Category: Scans & Replicas