matplace
Monitor stand Legs

Monitor stand Legs

by 3DDIY · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)

About the model

These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8 inches deep to friction fit into the slot. The length is up to you I suggest if you use it longer use more legs to counter any bowing. You just need to slide the piece further into the middle where you need support. The design inside is based on your infill pattern. I used a honeycomb with no top and bottom layers. You want your thickness of walls set to 9. Pictured is honeycomb at 6% infill and no rotation on the pattern. You can have fun with trying gyroid triangles etc. Print Settings Printer Brand: Prusa Printer: I3 MK3SRafts: No Supports: NoResolution: .2 Infill: 6 Filament: prusament PETG galaxy black Category: Office

Similar models