Monitor stand

About the model

Legs for a monitor stand (or any kind of short table) that utilize a standard 3/4" boards or plywood as the horizontal surface. There are two mirrored corners and one symmetrical leg which can be used in the middle if you need some extra support or don't want to have the legs right on the corners. Each leg has holes for mounting with a #6 wood screw, I recommend using ones ~5/8" or else you will risk running them into each other or breaking through the top surface of the wood. Legs provide 2.7 in (68.58 mm) of clearance for your keyboard or whatever you might wanna store underneath. Update: Included a set of shorter legs for when less height is needed, should give 1.7 in (43.2 mm) of clearance under the wood as well as a set of taller legs when you need more height, should give 2.7 in (68.6 mm) if clearance. Update: Included tall and short versions of the center style support Update: Link to the Fusion 360 file for ease in modifying the legs to your own desired size, just mirror the part when you're done for the other side: https://www.dropbox.com/s/hwktxe0vywwq1uv/Stand.f3d?dl=0