Modern geometric succulent plant pot

About the model

I decided to move away from Thingiverse and as a first upload to prusas printables I chose my modern geometric pattern planters. As a bonus for printables.com I added a version drain holes in the bottom of the big pots so that you don't have to use the inside planting pot. If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221344 Please keep in mind that they are under a NON COMMERCIAL license, so don't sell the files or prints using this design. Original description on my thingiverse: I designed three geometric plant pots for some succulents. In addition, I created an inside pot for each planter with some holes in their bottom and a little offset from the ground so that excess water can escape. They were designed to fit small succulents with an inside width of ~60 to ~65 mm. They are all around the same height (roughly 60mm from the ground). […] I would love to see your prints, so if you make one be sure to post a picture under makes. If you like my designs or have any questions leave a comment and maybe consider a little tip. I also added an STL file for the base. Mine is made of concrete and not 3d printed, but I modeled it anyway to find out how the planters would look on it. It is about 260 mm long so maybe you have to scale it down a little bit to make it fit on your print bed.