matplace
Minolta Camera 16mm Film Cartridge

Minolta Camera 16mm Film Cartridge

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

Minolta Camera 16mm Film Cartridge Printer: Bambu P1P Nozzle: 0.4 Profile: 0.12mm Fine @BBL P1P Filament: Overture PLA, Black Model must be printed using a 0.3mm wall width to insure that the fit tolerance is maintained. ---------------------------------------------------------------------------------------------------------------- I have added an image of the cartridge with a strip of flocking tape attached to each side of the film pass through slot. The flocking tape fits just right to stop 99.9% of the light from entering the film cartridge and still allow the film to slide in and out. The flocking tape I used was VCC Flocking Tape [Non-woven Fabric] (FLOCK-1): 1/2 in. x 300 in. (Black) https://www.amazon.com/J-V-Converting-FLOCK-1-BLK2833-Flocking/dp/B01B5FNRA8?ref_=ast_sto_dp&th=1