matplace
Map from the Princess Bride - Hueforge Print

Map from the Princess Bride - Hueforge Print

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. If you're willing to do some maths, you can reduce print times by using a layer height modifier to print the base layers at a taller height. I printed this on a 0.4 nozzle, which sacrificed a bit of the detail in the lettering. You might be able to get away with a 0.2 nozzle but it might take a lot longer. This was a17 hour print on a 0.4 nozzle. Filaments Used: • PETG JAYO Black Transmission Distance: 0.3 • PLA+ eSun Grey Transmission Distance: 1.4 • PLA Sunlu Beige Transmission Distance: 8.2 • PETG JAYO White Transmission Distance: 6 Swap Instructions: • Start with Black • At layer #20 (0.92mm) swap to Grey • At layer #22 (1mm) swap to Beige • At layer #25 (1.12mm) swap to White for the rest.