matplace
Lithophane Frame Light Box with Fairy Lights

Lithophane Frame Light Box with Fairy Lights

by AaronLK · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 180 mm
Printing estimate
about 85 g of filament, 4 h 5 min
Price with us
from €10.20 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

For my model I used small battery powered fairy lights with 40 LEDs.I made different variants so that most common picture formats can be used. The heigt is always 130mm. For the model in the pictures I have used a 3x2 picture.For perfect fit I had to do a little bit of sanding on the frame of my lithophane. If you can not make yours fit fit you can use one of the models with higher tolerances (called "_LOOSE") Print Settings:Support needed!! The pins in the middle don't need support so you can use a suport blocker in that area.I suggest printing it laying flat. Lithophane Settings:I used this website to create my lithophane: Image to Lithophane (3dp.rocks)Make sure you use the same settings as I did (you can use different Thinnest Layer and Vectors Per Pixel settings if you want):

Similar models