matplace
Kumiko Asanoha Coaster

Kumiko Asanoha Coaster

by DSCMaker · Printables

Print it for yourself

The licence (CC BY-NC-ND (non-commercial, no derivatives)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-ND (non-commercial, no derivatives)
Largest side
about 105 mm
Printing estimate
about 18 g of filament, 1 h 35 min
Price with us
from €4.00 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

💮 The Concept This project revisits the traditional Japanese Asanoha (hemp leaf) pattern, often used in the art of Kumiko, to create functional and aesthetic coasters. Designed to be easy to print, this set brings a touch of geometric sophistication to any interior. 🛠 Included in this Model: • Shape Variants: 3MF files for both Square and Round versions. • Dedicated Holders: Two elegant holder models, perfectly fitted to accommodate 4 coasters each. ⚙ Recommended Print Settings Here are the settings I used to achieve the best results: Parameter Recommended Value Technical Note • Nozzle 0.4 mm Standard. • Layer Height 0.2 mm Good balance between speed and detail. • Infill 15% - Grid 10% may be sufficient. • Walls Minimum 2 Use 3 to further improve strength. • Others No supports, No skirt Unless your build plate has adhesion issues, a Brim is not necessary. https://www.patreon.com/cw/DSCMaker

Similar models