matplace
IKEA BROR wheel / caster mount

IKEA BROR wheel / caster mount

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

Wanted to add wheels to my IKEA BROR system (65x55x190cm; model 294.717.59 in my case; uses BROR posts model 103.332.87), so made this mount. No modifications needed in BROR system itself. Printed in MK3S+ from PETG, 0.3mm layer, 4 walls, 30% infill (you can use your own parameters). Wheels have ~ 37x46.5mm base plate with 33.8mm and 23.8mm spacing between holes center points. Wheels mounted using four M5x10mm hex bolts and self locking four M5 nuts for each wheel (bolt on top, nut on bottom - this orientation because top area needs to be flat for bror leg). Fusion 360 and step source files attached. Edit: Stronger (v2) version added. Printed (on X1C) with PETG using “0.28mm Extra Draft” mode and 8 walls. M5x12mm/14mm. Edit: This solution worked for me (so far 2.5 years with about 70kg on shelves) without any problems but I'm putting more weight on the Bror, so switched to full metal solution - corner caster wheels like https://www.castors.pl/product-pol-52404-Kolko-meblowe-obrotowe-z-narozne-50mm-KPCOR-TPA-50S-40kg.html