matplace
HGX Lite 2.0 (oblique tooth) extruder mock-up model

HGX Lite 2.0 (oblique tooth) extruder mock-up model

by majek · Printables

Do you have the file? Print it on our printer

The licence of the model (CC BY-SA (attribution, same licence)) allows commercial use too. Download the file at the source and upload it to us. We note the author and the source on the order for you.

Upload the file and print
Licence
CC BY-SA (attribution, same licence)
Largest side
about 150 mm
Printing estimate
about 285 g of filament, 10 h 40 min
Price with us
from €27.70 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths). Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position. Coordinates are based on filament path (XY) and bottom of extruder (Z). There are 3 STL-s: • only extruder • extruder with standard Nema14 20mm depth (as sold in set with extruder) • extruder with short Nema14 17mm depth (like Moons motors sold with TBG-Lite) Source files in OpenSCAD can be downloaded from https://github.com/majekw/vn-corexy/tree/main/HGX-Lite2

Similar models