matplace
Gridfinity 4x4 and 4x2 base French cleat mount

Gridfinity 4x4 and 4x2 base French cleat mount

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only

About the model

Two options for attaching back (cleat) on the two piece version • CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue • Hardware, made for ¼ bolts • 2 x ¾" long ¼ 20 bolt • 2 x ¼ 20 nuts Design details: • Holes on the bottom serve to prevent dust accumulation • Made for 3/4" plywood (note: 3/4" plywood is usually closer to 0.7" thick, or around 18mm). • Designed around standard imperial specs common in most US shops (sorry world) • Could easily be remixed for just about any mounting system Print details • Use snug supports just for the vertical holes, no other support needed (might even be able to get away with eliminating those) • Adaptive layer height saves a bunch of time • Printed great on a P1P, using Bambulabs Matte PLA

Similar models