matplace
Glowing Ghosts!

Glowing Ghosts!

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

A selection of Halloween ghosts that use LED tea lights to glow. Short Models (100mm Tall) • Scary Ghost • Spooky Ghost • Happy Ghost • Blank Ghost - Design your own face! (.f3d and .stl included) Large Models (150mm Tall) • Scary Ghost • Spooky Ghost • Blank Ghost - Design your own face! (.f3d and .stl included) Most tea lights have a 38mm (1.5in) diameter. The openings in these models are slightly oversized, so most (if not all) tea lights will fit. Just turn on the LED and set your ghost on top. If you are worried about getting lights that fit, these are the tea lights that I used. Check out my other holiday models here. Print Settings These have all been designed to print with 2 perimeters and require no infill. Some overhangs in the mouth and eyes require good cooling. The following filaments were used in the pictures above: • Sunlu PLA White

Similar models