matplace
Geared Phone stand

Geared Phone stand

by Thorin Oakenshield · Printables

Print it for yourself

The licence (CC BY-NC-ND (non-commercial, no derivatives)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-ND (non-commercial, no derivatives)
Largest side
about 110 mm
Printing estimate
about 72 g of filament, 3 h 5 min
Price with us
from €8.40 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not move under load. The Print-in-place version of the model cannot be disassembled. During the first tests, I found that the first one could be disassembled, so I added separate parts if you wanted to have a holder in different colors. 26.2. Update !! Added number of cutouts in the locking cylinder for finer adjustment of the holder angle. From 4 to 8 cutouts. If there is a problem with releasing the Aretation part, turn the knob a little sideways or tap on the hexagon. The tolerance between the parts should allow separation without problems. Try downloading the model again, I uploaded looser parts Optional model with fine angle locking added - entire Print-in-place holder, also individual parts - with 12 locking cutouts 24.3. UPDATE !!! Added after comments, the part of the Gear Holder arch that holds the phone has a cutout for better control of the phone,files are in the Gear Holder with Cut-out directory I make all my models for you for free, but if you would like to support me, you can become a member of my club!

Similar models