matplace
Garden Gnome Figurine

Garden Gnome Figurine

by Lilacpixiedust · Printables

Print it for yourself

The licence (CC BY-NC-ND (non-commercial, no derivatives)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-ND (non-commercial, no derivatives)
Largest side
about 110 mm
Printing estimate
about 85 g of filament, 4 h 5 min
Price with us
from €10.20 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

A cute standing garden gnome designed for clean, easy FDM printing. Prints upright with light or minimal supports and works great in PLA or PLA+. Smooth surfaces make it perfect for painting with acrylics—prime, paint, and seal for indoor or outdoor display. Great for planters, shelves, fairy gardens, or DIY craft projects. Technical Details • Printer Type: FDM • Layer Height: 0.16–0.20 mm • Walls: 3 • Top/Bottom: 4 layers • Infill: ~6% (Lightning or Gyroid) • Supports: Light/minimal; prints upright • Orientation: Upright for best detail • Filament: PLA or PLA+ • Cooling: Standard PLA cooling • Adhesion: Skirt or none; brim optional • Difficulty: Beginner-friendly • Post-Processing: Snip supports, light sanding optional, prime + paint recommended Painting Prime with any standard spray or brush-on primer. Acrylic craft paints work beautifully on the smooth surfaces. Finish with a matte clear coat if displaying outdoors. Tips are never required but always appreciated: https://buymeacoffee.com/lilacpixiedust

Similar models