matplace
Flight Fins for Onewheel PINT/XR/GT/ADV

Flight Fins for Onewheel PINT/XR/GT/ADV

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

If you need compatible FF fenders, purchase directly from flight fins, or browse my designs. I have models for the Pint, XR, GT and ADV. Print in TPU only…the softer, the better. Use 15-20% infill. No supports required. Two mounted fins require the following screws/nuts: • 4x - #12 5/8" Screw • 4x - #12 1" Screw • 8x - #12 KEPS Lock Nuts Included in the project file are optional extenders: • You will need to MIRROR one of the extenders in bambu slicer if printing both. • You will need longer screws for these to work. Boost MeIf possible, please boost, like and rate this model to show your appreciation and support.

Similar models