matplace
Death Star Wall Panel (Photography)

Death Star Wall Panel (Photography)

MakerWorld

This model cannot be printed on matplace

Its licence (personal use only) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
personal use only

About the model

I wanted to design a few backgrounds that could be backlit for small model photography. After printing, you can back with a filter material or paper. I ended up using white index cards. The stands should be press fit, but may require a dab of glue depending on your printer. Models - Descriptions • Empire_Wall_Panel-168mm - 168mm wide panel. • Empire_Wall_Panel_84mm - 84mm wide panel. Stands • Empire_Wall_Stand_168mm - Full length wall stand (Reduce length 24mm if doing a corner, or reduce length to 84mm if doing the 84mm wall). • Empire_Wall_Stand_Corner - 24mm Corner for use when joining two walls at 90° My Print Settings: • 4 perimeters • Models should be printed face down (default of downloaded .stl) • 0.20mm Layer height Original Redesign/Remix from this panel: https://www.thingiverse.com/thing:2537299

Similar models