matplace
Dashboard wire trim fit clip for dash cams

Dashboard wire trim fit clip for dash cams

by Adam · Printables

Print it for yourself

The licence (CC BY-NC-SA (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-SA (non-commercial)
Largest side
about 85 mm
Printing estimate
about 8 g of filament, 32 min
Price with us
from €3.40 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

This clip fits between the trim panels on your car's dashboard to guide a dash cam cable. Design features This has an opening for a 4 mm wire, and is designed to be printed in flex material to make sure it doesn't vibrate or cause rattles. The tab at the bottom is meant to be squished between the trim panels on your dashboard to route the cable. There are two versions, one with a thick tab (2 mm) and one with a thin tab (1 mm), depending on your car's fit. Printing and assembly tips • Choose the version you'd like. • Print the model as oriented in the .stl files, using flex material. • To insert, gently push the clip between your dashboard panels and then put the wire in from the top opening. • To remove, gently remove. Notes I've designed the model with OpenSCAD and can adapt it within a certain range (e.g., wire diameter, tab length, etc.)

Similar models