matplace
Creality K1 Filament Sensor Upgrade

Creality K1 Filament Sensor Upgrade

by Henlor · Printables

This model cannot be printed on matplace

Its licence (CC BY-NC-SA (non-commercial)) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
CC BY-NC-SA (non-commercial)

About the model

This mod is meant to make your life easier when you need to couple/decouple the PTFE tube. Bill of Material ECAS04 PTFE connector M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping) M3x6 mm FHCS threading screw (one of the screws holding the stock ptfe coupler) Print Settings Layer height : 0.15 Wall count : 4 Top/bottom layer : 5 Infill : 30% No support Material : PETG minimum if inside the chamber Change Log 30 October 2023 First release ❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates. If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued. ☕ Cheers!

Similar models