MOZA R9 Wheelbase Tablemount
MakerOnline
MakerWorld
The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.
Upload the file and printSo, i had to replace the 40 yo. pulley from the top of the mast of my boat and i decided to print one. I decided to make a bearing pulley so it would run smoother. It has very tight tolerances so you have to break the gears free with a little bit of bending after printing!!!!!! It seems solid at first but will break free after a little bit of bending. The tolerances are really tight so the parts will not have a lot of play! Also you need to import both parts at the same time inside the slicer. The diameter of the groove for the cable/wire is 4mm! My Print settings: Filament: XT-CF20 0.2mm layer height Temp: Bed 90°C, Hotend 260°C (i used glue stick on the bed) Max print volume: 8mm³/s Fan speed: between 20%-50% Support: yes, I printed it with the tree support funciton of my X1 Carbon and the overhangs look good and everything came off pretty well. (I transfered this from my Page on printables | https://www.printables.com/de/model/352753-bearing-pulley)
MakerOnline
MakerOnline
MakerOnline
MakerOnline
MakerOnline
MakerOnline
MakerOnline
Cookies and measurement. The necessary cookies are always on; visit measurement and ads only with your consent. More about cookies