matplace
Atlas lamp

Atlas lamp

by nahojjjen · Cults3D

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 140 mm
Printing estimate
about 185 g of filament, 7 h 0 min
Price with us
from €18.50 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

A sculpture of Atlas with a cutout for a lamp, holding a lithophane earth. ###Assembly: 1. Glue the halves of the earth together. 2. Glue the earth onto Atlas. 3. Insert lamp that fits hole. ###Tip: I suggest you disable "Compensate Wall overlaps" for the earth lithophane if you're slicing in cura - otherwise it seems to make an absolute mess of the surface. Depending on your infill% and lamp weight, the print might become unstable. If you're conserned abouts stability, I recommend you add some sort of stand/pedistal/floor underneath Atlas. ###Different sizes: There are two sizes available in the downloads, normal size and "mmm_75" variants. The 100% size needs a print XY area of at least 23x23cm, and the 75% needs 17x17cm. The standard version is made to fit a normal E27 lightbulb, the smaller variant needs a smaller light-fixture. You can download the zzz_Alt_model if you want to make your own custom-tailored cutout for your own lamp. ###Warning: Don't rescue the earth model. The lithophane earth has thin walls to let light through - if you rescue the model, the earth will not slice properly.

Similar models