Astronaut-Baloon / HueForge

About the model

Astronaut in space with a balloon Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm wall loops 2 Top shell layers 4 Bottom shell layers 3 Swap Instructions: 4 colors Black until layer #5 at 0.48mms Gray until layer #10 at 0.88mms Wood/Light brown until layer #19 at 1.6mms White until layer #39 at 3.2mms Swap Instructions: 7 colors Black until layer #4 at 0.4mms Blue until layer #7 at 0.64mms Red until layer #11 at 0.96mms Yellow until layer #15 at 1.28mms Jungle Green until layer #19 at 1.6mms Orange until layer #23 at 1.92mms White until layer #54 at 4.4mms