Articulated Octopus

About the model

ℹ Tips for printing: • Filament: PLA • Supports: No! • Layer height: 0.16(0.15)mm or 0.2mm • Wall loops: 3 • Infill: 15% • Seam position: back • Wall generator: - • Detect thin walls: - • Brim: No! • BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! • Info‼: Do not scale the Octopus any smaller otherwise the connections will no longer work! • Info‼: If you apply too much force to the legs they may break because the connections are small! • Info‼: Please be careful when removing the Octopus from the print bed! ------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------ Colors and filament I used (4 Color): • PLA Matte / Plum • PLA Matte / Pink • PLA Matte / Black • PLA Matte / White Or decide for yourself which colors and how many you want to use! ℹ I made 2 Versions one without painted dots and one with painted dots in the model! ℹ This model is very filament wasteful please keep that in mind! ------------------------------------------------------ ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling! (Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)