AMS Stacking Stand V3

About the model

※ Oct. 6th, 2025 / AMS 2 Pro version has been published seperately. https://makerworld.com/models/1861875 ※ The horizontal width of the bracing for the AMS 2 Pro is 3mm longer. You can simply print only the bracing parts(Plate 2) from the link above and use them for AMS 2 Pro. ---------------------------------------- This is an AMS Stacking Stand with Bambu Lab P1P Armor Modplate style. All gaps for assembly are intentionally very small. If it's difficult, please use a tool like a rubber mallet. If you need a Build Plate Holder addition, please check the link below. https://makerworld.com/models/62232 Also, if you're looking to use the AMS HT as well, you might want to check out the AMS-HT / Shelf Add-on designed by SigOS. https://makerworld.com/models/2134937 Updated on Oct. 7th, 2025 - The overall design has been updated to V3. - When assembling the side panels and extensions, no separate pins are needed anymore. - The height of the extension panel has also been increased by 10 mm, allowing the lower AMS lid to open more fully. - The previous data has been archived, so if needed, please download the Archive_251007.zip file. How to assemble [ Instruction for Archived version ] ---------------------------------------- Updated on Jan. 7th, 2024 - The wall extension(Riser) is 20mm taller than the previous one, so the lower AMS top lid can fully open without the need to hold it. - Also, you can add one more bracing when you use the wall extension for more rigidity. Pins are separate parts because they need more strength, so at least 50% infill and 4 wall loops are recommended. * If you want to push the lower AMS further back, please use Pin4 v2 & Pin4-Spacer instead of Pin3 v2. * All pins are redesigned for better strength. Thanks for the great idea! @djwhouse Now, pins can be printed horizontally. • Pin1 v2(13mm) & Lock : for assembling bracing parts. • Pin2 v2(40mm) : for adding side wall extensions. • *Pin3 v2(20mm) : for joining bracing assembly and side walls. • *Pin4 v2(50mm) & *Pin4-Spacer : (Deeper) for joining bracing assembly and side walls.