matplace
Air Tight Filament Dry Box and Spool Holder - Remix

Air Tight Filament Dry Box and Spool Holder - Remix

by TperroneDesign · Printables

This model cannot be printed on matplace

Its licence (CC BY-NC-SA (non-commercial)) does not allow printing to order. You can download the file at the source and print it yourself.

models to print
Licence
CC BY-NC-SA (non-commercial)

About the model

Great original model by Ondřej Stříteský, and great remix by EsotericMaker. After printing EsotericMaskers version I decided to make some changes for my personal setup. I moved the collet location to the bottom half, made the side walls thicker, added a stop for the hinge, removed the sensor cut out, and changed the base of the box to use a removable Prusa MINI spool holder. You will need 2 M3x30 and 2 M3x10 screws for assembly. I also included the Ultimate Spool Holder by G.Design. I modified the size of the Base, Rails and Rollers to fit inside the Dry Box. You will need 4 M3x10 screws 4 M3 hex nuts and 4 bearings for assembly. Share a picture if you print one!

Similar models