Printables.com

Lithophane Lamp

Zdarma stažení modelu zdarma

647

Likes

Print parameters

MaterialPLA

Indicative parameters recommended for download. The printer may adjust them as needed.

Model license

CC BY-NC Free for non-commercial use — credit the author.

⚠

Pouze pro osobní použití — licence neumožňuje prodej tisku. Můžete si ho nechat vytisknout pro vlastní potřebu (tiskárna vám poskytuje pouze službu tisku, ne obsah modelu).

Original author: Wiikendz · Originál na Printables.com

lamp lithophane

Added 4. 5. 2026

Description

230102: Added Base and Roof with slightly bigger tolerance since some had issues with the fit being too tight, Original parts have 0.5mm overall, parts with increased tolerance has 1mm overall. Base and Frame printed in 0.2 with 15% infill. Roof printed in 0.1 with 15% Infill. Support needed on the Base.The base has a 29mm hole to put a lightsource through, I use an E14 LED-Lamp.I recommend using SuperSlicer, enabling only One Permiter on first layer aswell as Hilbert Curve pattern on the bottom layer for a good looking surface on the base as the printed bottom will be upwards when assembled.