matplace
Solar System Lithophane Planet Lamp Collection - ⌀150mm

Solar System Lithophane Planet Lamp Collection - ⌀150mm

autor FritzPeppone · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 150 mm
Odhad tisku
asi 285 g filamentu, 10 h 20 min
Cena u nás
od 682 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

IntroductionThis model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm, ⌀205mm, ⌀150mm (this upload), ⌀75mm, ⌀25mm.If you like my work, please consider supporting me. Your support will help me to make more models available for free. https://ko-fi.com/fritzpeppone. If you like to use my models commercially, please obtain a commercial license by joining my club. The commercial license includes all of my models except those that are based on the intellectual property of others (e.g. the GTA V map lamps) or remixes (e.g. the Death Star or Phobos lamps).RequirementsAll Lamps have a size of ~ 150mm x 150mm x 140mm. They should print fine on any printer. You will need around 150g of Filament (preferably PLA or PLA+) per lamp.The lamps are mounted to their base with a M50x3 metric thread. The idea for the thread is taken from the Lithophane Moon Lamp with wide Screw Base by The Quicksilver. I am providing multiple different base options that all use the same thread. Choose the lamp of your liking and match it with any lamp base of your liking. Currently, you have three base options to choose from, using E14 sockets and the LED Lamp Kit 001. Print SettingsThere are only a few settings you should tweak in the slicer to print the lamps. Print in PLA or PLA+Recommended layer height: 0.12mmUse the Arachne Perimeter Generator for more precise printing with better detailsIf you use Arachne, set the minimum line width to 75% to avoid holes!Set wall count to 7-8 to obtain a solid lampSet number of top layers to 10Set seam position to alignedIf necessary, ctivate Brim (Outer Brim Only) and set the Brim width to 5-10 mmNo Support required! The lamps print perfectly fine without support. All lamp bases come with in-built snap off supports (where required).Be aware, that slicing and printing may take a very long time. The STL files can tak

Podobné modely