Solar System Lithophane Planet Lamp Collection - ⌀75mm

IntroductionThis model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm, ⌀205mm, ⌀150mm, ⌀75mm (this upload), ⌀25mm.If you like my work, please consider supporting me. Your support will help me to make more models available for free. https://ko-fi.com/fritzpeppone. If you like to use my models commercially, please obtain a commercial license by joining my club. The commercial license includes all of my models except those that are based on the intellectual property of others (e.g. the GTA V map lamps) or remixes (e.g. the Death Star or Phobos lamps).RequirementsThe regular lamp size is ~ 75mm x 75mm x 70mm. There is also a “large” version in ~ 100mm x 100mm x 95mm available (so far only for the sun). They should print fine on all FDM printers and on most SLA printers. You will need around 30g-40g of Filament (preferably PLA or PLA+) for the regular sized lamp.The lamps are mounted to their base with a M28x2 metric thread. The idea for the thread is from the Lithophane Moon Lamp with wide Screw Base by The Quicksilver. I am providing multiple different illumination options that all use the same thread. Choose the lamp of your liking and match it with any illumination of your liking. All compatible lamp bases are listed below. You may either need a standard E14 socket with a small LED, a Keystone socket, USB LED stick and a USB cable, an Ikea Solvinden fairy light or a magnetic button cell PCB with LEDs.Print SettingsThere are only a few settings you should tweak in the slicer to print the lamps. Print in PLA or PLA+Recommended layer height: 0.15mmUse the Arachne Perimeter Generator for more precise printing with better detailsIf you use Arachne, set the minimum line width to 75% to avoid holes!Set wall count to 5-6 to obtain a solid lampSet seam position to alignedActivate Brim (Outer Brim Only) and set the Brim width to 5-10 mmNo Support required! The lamps print perfectly fine without support. All lamp bases come with in-built snap off supports (where required).Only for Saturn with Rings: activate extra perimeters on overhangs to achieve a smooth bottom sideBe aware, that slicing and printing may take a very long time. The STL files can take up to 10 min. to slice. For Bambu Studio users: Bambu Studio seems to struggle with the Arachne Perimeter Generator. If you are unable to slice a lamp with Arachne, use the Classic Perimeter Generator.Also be aware, that both the lamps and the illumination options feature fine and intricate details and nasty bridging. Some printer tuning may be required for those prints.This is not a SpeedBoatRace print! Use conservative print speed settings to avoid artefacts! It's totally fine if your print takes one or two days to finish.Filament, resin and light sourceFilament matters. A lot! Depending on your filament choice, your lamp may have more or less contrast or a warmer or cooler color temperature. You can also change the outcome by choosing light sources with different wattage or color temperature. Since the lamps are very small, you can also print them in resin. The picture below shows different outcomes depending on your filament type:All of the four Panels above were printed with different white PLA/PLA+ filaments but illuminated with the same 1W LED bulb. Before starting a multi-day print, I recommend printing the Solar System Lithophane Calibration Panel to test how your print will turn out. You are also by no means limited to white lights and filaments. Check the makes below to get inspired what color and light choices other makers made.My personal favourite filament and the one I used for all lamps in my photos is Filament PM PLA+ White.Your light source also matters! While you can use 1W bulbs with the E14 Socket, other illumination solutions such as the fairy lights have a way lower wattage. Filament PM PLA+ for example is still a good option for 1W bulbs but a very poor option for the fairy lights. Test your filament with the light source you intend to use!Planet LampsThe list below contains all (Dwarf)Planets of the solar system and the sun, turned into lithophane lamps. All of the lamps below are original creations. There are versions with the thread at the south pole (for standing use) and upside down versions (USD) with the thread at the north pole (for hanging use). The SunMercuryVenus AtmosphereVenus SurfaceEarth SatelliteEarth BathymetryEarth FishworldEarth PoliticalEarth Political BathymetryEarth TopographyMarsJupiterSaturnSaturn with RingsUranusNeptunePlutoMoon LampsThe list below contains several moons of the solar system, turned into lithophane lamps. All of the lamps below are original creations.There are versions with the thread at the south pole (for standing use) and upside down versions (USD) with the thread at the north pole (for hanging use). The MoonIoCallistoEuro