Poop Chute Large Magnetic for Bambu Lab X1

This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The mounting hole for the magnets are cut oversized (0.51 diameter) for an easy fit. Might need to super glue the magnets in place. The cutaway o n the size serves two functions. It gives you a recessed handle to grip the poop chute when taking it off. The angled top of the cutaway helps direct the waste filament across the chute. Helps to keep the filament from bunching up directly beneath.   Filament - I used PLA+ or PLA Carbon Fiber Support - Yes; Hybrid, Auto Layer - 0.2mm Infill - 15% 3mf file using Bambu Lab Studio (slicer)   UPDATE 2: The design was updated to accommodate the feet added to the X1, X1C, P1P, and P1S. The new design is poop_shoot_L_magnetic_V2   UPDATE 3: The design was updated to fit a more common magnet size (10mm x 3mm). Added a strengthening section on inner flange. New design is poop_shoot_L_magnetic_V3     You can find a finished Poop Chute with the magnets on our website www.v3precision.com.