matplace
Prusa CORE One/+/L Dry Box mod

Prusa CORE One/+/L Dry Box mod

autor Scott · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-SA (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-SA (jen nekomerčně)

O modelu

Update log at the end of description   INTRODUCTION: This mod involves adding a dry box on the right side of the printer. I decided to make my one as I wanted it be printable on the actual bed size of CORE One printer. I can't garantee it to be 100% air tight, but I tried to make it as sealed as possible.   OPTIONS:   I offer two options stored in two different folders: • A standard dry box that will fit perfectly on the CORE One and will appear flush with the side of the printer. This one can store up to 7cm width spools (Prusament for example). • A larger dry box which will protube a little from the printer but can store larger spools like Sunlu (8cm width). Among the files of each folder, I included 2 options for the dry box: • One with a hole for PTFE adapter • One without this hole so you just pass filament through. I included for the lid (door) and the handle two files: • STL for single color parts • STEP file for multi color parts in the case you can print in multi color   HARDWARE needed: For this mod you will need: • 4* M3x20mm screws to mount the drybox on original spool holder holes • 2* M3x35mm screws for the hinge of the drybox • 1* rectangle hygrometer like this one • 1* PTFE adapter PC4-M10 (optional): like this one   CONTENT: Here are the different components you will have to print: • Dry box main part (see above for options) • Lid box (single or multi color) • Lid gasket • Handle (single or multi color) • Handle gasket  • Handle lock • 3 spool adapters for different inside diameters (50mm, 55mm and 60mm) to keep the spool as centered as possible on the dry box • Dessicant basket • Dessicant basket lid • Hygrometer plug to clos the hole if you don't have one   PRINTING and FILAMENT: I advise you to print the gaskets with TPU filament as soft as possible Other than that, you can choose any filament you want!   ASSEMBLY Here are the steps to assemble the mod. Even if nothing is complicated, I rather detail ea

Podobné modely